The overall lifting guardrail device of the lifting cargo elevator has good strength, and the mobile lifting cargo elevator greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled through one lifting. It has strong load-bearing capacity and is suitable for two people to climb high at the same time. It can also be customized into various non-standard products according to different environments. Double track and double cylinder cargo elevator: double sets of guide rails, one left and right oil cylinder, suitable for lifting large tonnage goods, The load capacity can reach up to 30 tons, and the oversized table can be designed into four oil cylinders. The chain and steel wire rope have dual safety, achieving the advantages of safe use and long service life

升降貨梯整體升降式護欄裝置，強度好，移動式升降貨梯運輸時大幅度地降低整機高度，裝卸十分方便，通過一次升降即可完成裝配或拆卸，承載能力強，適合于兩人同時登高作業，還可根據不同環境訂制成各種非標產品，以滿足不同需要。

The overall lifting guardrail device of the lifting cargo elevator has good strength. When transporting the mobile lifting cargo elevator, the height of the entire machine is greatly reduced, and the loading and unloading is very convenient. It can be assembled or disassembled with one lifting, with strong load-bearing capacity. It is suitable for two people to work at the same time. Various non-standard products can also be customized according to different environments to meet different needs.

用起重機吊起吊籠，從標準節上方使吊籠準確就位;將兩吊籠分別套在導軌架上，并緩緩放置于緩沖彈簧上。將兩個吊籠的驅動架準備好，將各背輪及滾輪調整極大間隙的位置，以利于安裝驅動架。用起重設備再給升降貨梯基本部分安裝一個標準節，擰緊聯接螺栓。用起重設備分別將兩套驅動架安裝在各自的吊籠上方并穿好聯接銷軸，將籠頂護欄安裝好。

Use a crane to lift the lifting cage and accurately position it from above the standard section; Place the two suspension cages on the guide rail frame and slowly place them on the buffer spring. Prepare the drive frames of the two suspension cages and adjust each back wheel and roller to a position with maximum clearance to facilitate the installation of the drive frame. Install a standard section on the basic part of the elevator using lifting equipment and tighten the connecting bolts. Use lifting equipment to install two sets of drive frames above each suspension cage and thread the connecting pins, and install the cage top guardrail.

本文由山東升降貨梯廠家提供幫助，更多的相關內容請點擊http://hblsnyfwzx.cn希望本文能夠為您帶來幫助，感謝您的閱讀！

This article is provided by Shandong elevator manufacturers for assistance. For more related content, please click http://hblsnyfwzx.cn I hope this article can be helpful to you. Thank you for reading!