The aluminum alloy elevator platform truck must be equipped with professional driver operators who have received special training, passed the examination, and held a certificate to work: According to the actual situation of the work, the above personnel can concurrently serve each other, but the part-time personnel must have a work permit for the part-time job, and be approved by the competent leader, while assuming corresponding responsibilities. After the construction is completed, it is necessary to move the lifting platform on the site, and a professional driver should operate the lift platform truck.

升降平臺車作業前，工作負責人應向平臺車操作人員，參加工作的全體人員進行技術和交底，內容應包括：工作內容及要求;注意事項及危險點;人員分工情況及責任范圍：工作負責人除要對車況和工作人員工作進行檢查以外，還要負責查看地形環境起降是否符合技術措施的要求或事先制定的工作方案，如有出入，則應制定出相應的措施后方能開始工作。

Before lifting the platform truck, the person in charge of the work shall conduct technical and safety disclosure to the platform truck operator and all personnel participating in the work, including: work content and requirements; Safety precautions and danger points; Personnel division and scope of responsibility: In addition to checking the vehicle condition and staff work, the person in charge of the work should also be responsible for checking whether the terrain environment takeoff and landing meet the requirements of safety technical measures or the work plan formulated in advance. If there is any discrepancy, corresponding measures should be formulated before starting work.

支腿是鋁合金升降機升降平臺車操作的一項重要準備工作，應選擇平整的地面，如地基松軟或起伏不平，必須加道木墊實受力后確定無誤，才可進行工作。

The support leg is an important preparatory work for the operation of the aluminum alloy elevator elevating platform car. A flat ground should be selected. If the foundation is soft or uneven, a wooden cushion must be added to firmly bear the force before the work can be carried out.

鋁合金升降機升降平臺車駕駛員必須按照機械的保養規定，在執行各項檢查和保養后方可啟動升降平臺車，工作前應檢查升降平臺車的工作范圍妨礙升降平臺車回轉及行走的障礙物。

The driver of the aluminum alloy elevator platform truck must follow the mechanical maintenance regulations and perform various inspections and maintenance before starting the elevator platform truck. Before working, the working range of the elevator platform truck should be checked to remove obstacles that hinder the rotation and walking of the elevator platform truck.

一般說來，液壓鋁合金升降機升降平臺應先起下臂，再起中臂，起上臂。在升降平臺車回轉操作過程中，必須在下臂起升一定高度后方可進行回轉，回轉過程應緩慢，注意各臂及平臺對各設備的距離是否滿足需要。

Generally speaking, the lifting platform of a hydraulic aluminum alloy elevator should first lift the lower arm, then the middle arm, and finally the upper arm. During the slewing operation of the elevating platform truck, the lower arm must be raised to a certain height before it can be rotated. The slewing process should be slow, and attention should be paid to whether the distance between each arm and platform to each equipment meets safety requirements.

鋁合金升降機升降平臺車上工作人員應佩帶帶，在帶電區域工作時，應將車體按規定進行接地，升降平臺車登高作業由工作負責人進行指揮，負責人應按照信號與升降平臺車操作人進行聯系。發出的信號必須清楚準確。

The personnel on the aluminum alloy elevator lifting platform vehicle should wear safety belts. When working in a live area, the vehicle body should be grounded according to regulations. The lifting platform vehicle climbing operation should be commanded by the person in charge, who should contact the lifting platform vehicle operator according to the signal. The signal must be clear and accurate.

本文由電動液壓貨梯整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://hblsnyfwzx.cn我們會有更多精彩內容等你查看。

This article is organized and released by the electric hydraulic cargo elevator. Do you have any understanding of these contents? For more information, please click: http://hblsnyfwzx.cn We will have more exciting content waiting for you to check.